Riverstone Networks RS 8000 Manuel de l'opérateur télécharger pdf (Page 51)

Riverstone Networks RS 8000/8600 Switch Router Getting Started Guide 2-27

Introduction Hardware Overview

Per-port Link Green – indicates that the port hardware detects a cable plugged into

the port and a good link is established.

Red (intermittent) – indicates that the port received an error during

operation.

Red (solid) – indicates that the port hardware detects a cable plugged

into the port, however, a bad link is established.

Off – indicates that no link from the port exists.

Per-port Rx Green – indicates when the port’s transceiver receives packets.

Orange – indicates when the port’s transceiver receives flow-control

packets.

Per-port Tx Green – indicates when the port’s transceiver transmits packets.

Orange – indicates when the port’s transceiver transmits flow-control

packets.

Per-port AN Green – indicates that the line card has auto negotiated the operating

mode of the link between full-duplex and half-duplex.

Orange (intermittent) – indicates that auto negotiation is in process.

Orange (solid) – indicates a problem with auto negotiation

configuration.

Red – indicates an auto negotiation failure. This fault may occur if the

link partner does not support full duplex.

Off – indicates that auto negotiation has been disabled or the link is

down.

Table 2-20 LED description for 1000Base-SX line card (Continued)

LED Description

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 157 158

Pas de commentaire

Riverstone Networks RS 8000 Manuel de l'opérateur Page 51