Riverstone Networks WICT1-12 Spécifications télécharger pdf (Page 68)

4-2 Riverstone Networks RS 32000 Switch Router Getting Started Guide

Powering on the RS 32000 Initial Configuration

5. When the software is fully booted, the following messages appears on the management console:

6. As prompted, press Return (or Enter) to activate the Command Line Interface (CLI) on the console.

L2-Cache 256 KB, linesize 32, cache enabled.

Mounting 16MB external flash card . . . Done

Autoboot in 2 seconds - press ESC to abort and enter prom

using link: bootsource

link pointed at file:/pc-flash/boot/ros80/

source: file:/pc-flash/boot/ros80/

Loaded version file

Loading kernel (base 0x80001000, size 50592)

(base 0x8000d5a0, size 2803976)

100% - Image checksum validated

----------------------------------------------------------------------

RS 32000 System Software, Version 8.0.0.0

Processor: R7000, Rev 2.1, 280 MHz

System started on 2001-09-01 18:57:40

----------------------------------------------------------------------

2001-09-01 18:57:45 %SYS-I-FLASHCRD, Mounting 16MB Flash card

2001-09-01 18:57:53 %SYS-I-FLASHMNTD, 16MB Flash card mounted

2001-09-01 18:57:53 %SYS-I-INITSYS, initializing system RS 32000

2001-09-01 18:57:53 %SYS-I-DSCVMOD, discovered 'Control Module' module in slot CM/8

2001-09-01 18:57:58 %SYS-I-INITSLOTS, Initializing system slots - please wait

2001-09-01 18:58:07 %SYS-I-MODPROBE, Detecting installed media modules - please wait

2001-09-01 18:58:10 %SYS-I-DSCVMOD, discovered '8-Gigabit "T" (GBIC)' module in slot 3...

Press RETURN to activate console...

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 110 111

Pas de commentaire

Riverstone Networks WICT1-12 Spécifications Page 68